Technical specs of air mesh belt dryer:
1. PTFE Mesh CZPT Belt
two. Warmth resistant, Microwave secure
three. Large drying effectiveness
four. Non-poisonous & non-adhere
five. Excellent tensile energy
Description of air mesh belt dryer:
PTFE Coated Fiberglass air mesh belt dryer is preferably suited for conveying merchandise in very productive air distribution programs allowing optimised humidity elimination to consider place and is commonly utilised in ultra violet and infra pink dryer units
The open spot permits greatest air movement optimising drying instances even though its excessive houses make it a natural option for dryer manufactures.
Purposes of air mesh belt dryer:
PTFE Coated Fiberglass Mesh CZPT Belts are used in apps such as the drying of printed items for case in point Level of exhibit stands, T-shirts, glass and mass produced paper prints. Print dryers typically decide for Extremely violet, Infra purple or sizzling air as the warmth source to dry.
Other programs selection from the drying of cereals, non woven’s, charcoal interlinings, carpet & carpet tiles, printed circuit boards and shrink-wrap tunnels but to identify a few.
Functions & Rewards of air mesh belt dryer:
PTFE open mesh conveyor belting is mild weight and cost effective therefore is effortless to take care of and much less high-priced than wire options that can be hard to change. Usually equipped with a metallic clipper type fastener these design of belts can very easily be taken off and changed therefore minimising downtime and preserving money. This substance can be supplied in carbon loaded black consequently offering antistatic qualities.
Materials Homes
· Temperature resistance: -70° C up to additionally 260° C
· Chemical Inertness
· Ultraviolet, Infra-purple, microwave, radio frequency resistance
· Non-Stick surface
· Light-weight and energy performance for cost-effective procedure
Additional Information
4×4 open location mesh is CZPT in widths up to 4000mm extensive and can be provided at any duration needed. In addition film, glass or kevlar can be applied as edge reinforcement relying of the atmosphere it will be utilized inside of. There are numerous methods of joining display-printing belts however the metallic clipper or spiral varieties are far more typical
| Model | Mesh Dimension | Substance | Thickness | Bodyweight | Temp Resistance | Max Width | Tensile Power |
| YS-6001 | 1x1mm | fiberglass | .5mm | 370g/m² | -70-320C | 4000mm | 310/290N/cm |
| YS-6002 | 2x2mm | fiberglass | .7mm | 450g/m² | -70-320C | 4000mm | 350/310N/cm |
| YS-6003 | 4x4mm | fiberglass | 1.0mm | 400g/m² | -70-320C | 4000mm | 390/320N/cm |
| YS-6004 | 4x4mm | fiberglass | 1.0mm | 450g/m² | -70-320C | 4000mm | 390/320N/cm |
| YS-6007 | 4x4mm | fiberglass +kevlar |
one.2mm | 600g/m² | -70-320C | 4000mm | 895/370N/cm |
| YS-6008 | 4x4mm | fiberglass | 1.0mm | 500g/m² | -70-320C | 4000mm | 395/370N/cm |
| YS-6571 | 4x4mm | Kevlar | one.0mm | 500g/m² | -70-320C | 4000mm | 900/600N/cm |
| YS-6012 | 4x4mm | fiberglass | 1.0mm | 550g/m² | -70-320C | 4000mm | 395/370N/cm |
| YS-6013 | 10x10mm | fiberglass | 1.2mm | 450g/m² | -70-320C | 4000mm | 360/300N/cm |
| YS-6014 | .5x1mm | fiberglass | .5mm | 420g/m² | -70-320C | 4000mm | 310/290N/cm |
| YS-6015 | 2×2.5mm | fiberglass | .9mm | 600g/m² | -70-320C | 3000mm | 390/320N/cm |
