Product Description

About Factory 

With more than 18 years’ histiory, we are a professinal manufacturer for drop forged products such as forged chain (X348 X458 X658 X678 X698 F100 F160), scraper chain (10160, 14218, 14226, 142N), conveyor trolley (X348, X458, X678, XT160), and drive chain (X348, X458, X678), and so forth standard moulds of chain. 

Besides, we can also produce as per your drawing or sample, special link chain, pusher, pin and plate, according to customers’ unique requirements.

Product Description

1) Material: Alloy steel, 40Cr, 42CrMo and so on.
2) Types: Standard types, X348 X458 X678, and so on. (Or as per your drawing)
3) Process: Moulding→Forging→Polishing & Blasting→Fine machining→Heat treatment→Blasting→Inspecting & testing→Packing

Product Show
 

Technical Data
 

Model Dimension Weight (Kg) Material Hardness Working Load (KN) Limit Load (KN)
P T C S F R D
10160B 101.6 24 36 13 14 6 14 0.32 20CrMnTi Surface HRC56-64°    
Depth 0.6-1.2mm
18 100
10160 101.6 30 36 13 14.5 9 14 0.36 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 21.6 120
14218 142 42 50 19 20.5 11 25 1.15 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 48.6 270
14226 142 62 50 28 30 15 25 1.75 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 61.2 340
2571 200 66 60 30 32 18 30 2.8 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 72 400
26014 260 70 75 31 33 20 34 5.2 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 135 750
142N 142 43 50 19 22 12.5 25 1.2 40Cr Quench HRC36-44° 75.6 420
150D 142 42 50 19 20.5 11 25 1.15 40Cr Quench HRC36-44° 75.6 420
MG20 200 70 50 27 29 17 35 3.78 40Cr Quench HRC36-44° 144 800
MG20B 200 70 50 27 29 17 30 3.82 40Cr Quench HRC36-44° 140.4 780
MG20C 200 70 50 27 29 17 28 3.85 40Cr Quench HRC36-44° 122.4 680
MS32 200 42 50 20 22 12 25 1.4 40Cr Quench HRC36-44° 75.6 420
MS55 200 80 70 35 38 25 28 4.36 40Cr Quench HRC36-44° 138.6 770
3006 200 65 70 30 33 24 32 3.6 40Cr Quench HRC36-44° 160.2 890
MS63 250 70 80 30 33 20 32 4.93 40Cr Quench HRC36-44° 147.6 820
S16 100 30 27 15 16 8 14 0.3 40Cr Quench HRC36-44° 16 88
S20 125 34 33 17 18 8 17 0.37 40Cr Quench HRC36-44° 19.4 108
S25 160 48 39 23 25 13 20 1.28 40Cr Quench HRC36-44° 55.8 310
S30 142 46 49 22 23.5 14 25 1.3 40Cr Quench HRC36-44° 91.8 510
Z16 100 40 35 18 20 12 17 0.4 40Cr Quench HRC36-44° 32.4 180
Z20 125 50 46 24 26 15 20 0.67 40Cr Quench HRC36-44° 59.4 330
Z20D 125 52 60 24 26 16 26 1.15 40Cr Quench HRC36-44° 82.8 460
Z25 160 58 55 28 30 18 25 2.25 40Cr Quench HRC36-44° 82.8 460
Z25D 160 66 64 29 31 22 28 2.6 40Cr Quench HRC36-44° 120.6 670
Z30 142 64 50 29 30.5 18 25 1.8 40Cr Quench HRC36-44° 111.6 620

Products & Testing Equipments
 

Products Application


Packing & Delivery
 

Why Choose Us?

1. We are engaged in chain industry over 15 years with rich market experience. We keep improving production techniques. All the products have longer working life and have passed the market test.

2. We can design the correct chains with high quality material, good abrasion resistance, good corrosion, high strengthen and etc as per your request or the chain application.

3. We are the chain manufacturer; you can directly purchase the product from us with low price and high quality.

4. We have a professional team for international trade, they have abundant experiences and are always ready to solve problems for customers. So you have nothing to worry about.

5. We have the long-term cooperative forwarder who can give us the lowest freight. And it can help you to save the freight. What’s more, for the FCL, we will design the packages as per the container sizes with the largest capacity to save the shipping cost for both of us.

 

Standard or Nonstandard: Standard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Mining Equipment, Agricultural Machinery, Coating, Spraying, Mining, Slaughtering, Assembly
Surface Treatment: Polishing
Structure: Combined Chain
Material: Alloy
Type: Cranked Link Chain
Samples:
US$ 5/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

bush chain

How does a bush chain handle misalignment in a system?

A bush chain is designed to accommodate a certain degree of misalignment within a system. Here’s how a bush chain handles misalignment:

1. Flexibility: The construction of a bush chain allows it to flex and adjust to minor misalignments. The bushings, which are inserted into the chain’s links, provide a degree of flexibility and allow the chain to move smoothly even when the sprockets are slightly misaligned.

2. Self-Alignment: The self-lubricating properties of some bush chains contribute to their ability to handle misalignment. The lubrication helps reduce friction and allows the chain to self-align by adjusting its position to minimize stress and binding caused by misaligned sprockets.

3. Tolerance for Misalignment: Bush chains are designed with specific clearance between the bushings and pins. This clearance provides some tolerance for misalignment. It allows the chain to accommodate slight angular or parallel misalignment between the sprockets without causing excessive wear or damage.

4. Compensation for Load Variances: In systems where load distribution is not uniform, such as conveyor systems, bush chains can help compensate for load variances. The flexibility of the chain allows it to adapt to changes in load distribution and adjust accordingly, reducing stress on the chain and sprockets.

It is important to note that while bush chains can handle minor misalignment, excessive misalignment should be avoided. Excessive misalignment can cause accelerated wear, increased noise, and reduced chain life. Proper alignment and regular maintenance are essential to ensure optimal performance and longevity of the bush chain system.

bush chain

How do you troubleshoot common issues with bush chains?

Troubleshooting common issues with bush chains involves identifying the problem and taking appropriate corrective actions. Here are some common issues and their troubleshooting steps:

1. Chain Misalignment: If the bush chain is misaligned, it can cause excessive wear, noise, and premature failure. To troubleshoot this issue, check the alignment of the sprockets and adjust them as necessary. Ensure that the chain runs smoothly and evenly on the sprockets without any binding or skipping.

2. Chain Binding: If the chain becomes stuck or binds during operation, it may be due to improper lubrication, debris accumulation, or worn-out components. Start by cleaning the chain and sprockets to remove any debris or contaminants. Lubricate the chain with the recommended lubricant to reduce friction. If the issue persists, inspect the chain for signs of wear and replace any worn-out components.

3. Excessive Chain Wear: Excessive chain wear can lead to elongation, reduced performance, and increased risk of failure. To troubleshoot this issue, measure the chain’s length and compare it to the manufacturer’s specifications. If the chain has elongated beyond the acceptable limits, it needs to be replaced. Additionally, inspect the chain for signs of pin and bushing wear, plate wear, or sprocket wear. Replace any worn components as necessary.

4. Insufficient Lubrication: Inadequate lubrication can result in increased friction, wear, and premature failure of the bush chain. If the chain appears dry or there are signs of insufficient lubrication, apply the appropriate lubricant to the chain according to the manufacturer’s recommendations. Ensure that the lubricant reaches all the critical components of the chain, including the pins, bushings, and rollers.

5. Chain Breakage: Chain breakage can occur due to excessive loads, sudden impacts, or worn-out components. To troubleshoot this issue, inspect the chain for any signs of damaged or broken links. Identify the cause of the breakage, such as overload or impact, and address it accordingly. Replace the broken chain links with a new chain segment and ensure proper installation.

6. Excessive Noise and Vibration: Unusual noise and vibration during chain operation can indicate underlying issues. Inspect the chain for signs of misalignment, worn-out components, or inadequate tension. Address the specific cause by adjusting the alignment, replacing worn parts, or adjusting the tension to reduce noise and vibration.

It’s important to consult the manufacturer’s guidelines and recommendations for troubleshooting specific issues with bush chains. Regular inspection, proper lubrication, and timely maintenance can help prevent common issues and ensure the reliable and efficient operation of the bush chain.

bush chain

What are the advantages of using a bush chain in power transmission systems?

Using a bush chain in power transmission systems offers several advantages:

1. High Strength: Bush chains are designed to handle high loads and provide reliable power transmission. They are capable of transmitting substantial amounts of torque, making them suitable for heavy-duty applications.

2. Efficient Power Transfer: Bush chains have low frictional losses, resulting in efficient power transfer from the driving source to the driven components. This efficiency helps optimize system performance and reduce energy consumption.

3. Wide Speed Range: Bush chains can operate at various speeds, from low to high, allowing flexibility in power transmission systems. They can accommodate different rotational speeds and adapt to the specific requirements of the application.

4. Compact Design: Bush chains have a compact and space-saving design, making them suitable for applications where space is limited. Their efficient power transmission capabilities enable the use of smaller and more compact components.

5. Long Service Life: When properly maintained, bush chains have a long service life. They are designed to withstand demanding operating conditions and provide reliable performance over an extended period. This reduces the need for frequent replacements and minimizes downtime.

6. Versatility: Bush chains are available in various sizes, configurations, and materials, allowing them to be used in a wide range of power transmission applications. They can be customized to meet specific requirements, making them versatile for use in different industries and applications.

7. Cost-Effective: Bush chains offer a cost-effective solution for power transmission systems. They are durable, readily available, and relatively easy to install and maintain. Their long service life and efficient operation contribute to overall cost savings in terms of maintenance, replacement, and energy consumption.

When selecting a power transmission system, considering the advantages of using a bush chain can help ensure optimal performance, reliability, and efficiency in the application.

China manufacturer Industrial Steel Forging Chain with Machinery Forged Parts and Bucket Transmission Elevator Conveyor Roller Bush Forged Chain Link in Industrial Line  China manufacturer Industrial Steel Forging Chain with Machinery Forged Parts and Bucket Transmission Elevator Conveyor Roller Bush Forged Chain Link in Industrial Line
editor by CX 2023-08-14