Portion I: Solution INTRODUCTION
one. Commodity: Chilly drawn seamless steel tube for hydraulic pillar
two. Dimension variety: 40mm*30mm-580mm*500mm
3. Accessible metal quality:
| SAE/AISI: | SAE1571, SAE1026, SAE1045, SAE4130, SAE4140 |
| DIN: | ST52, ST52.three, ST52.four |
| EN: | E355, C45E, 25CrMo4, 42CrMo4, CK45, S45C, E410, E470, 20MnV6 |
| GB: | twenty#, forty five#, 16Mn, Q345B, Q345C, Q345D, Q345E, 25Mn, 27SiMn, |
four. Manufacture technique: Chilly rolled, hydraulic cold drawn, hot rolled+deep gap unexciting
five. Delivery problem:
| BK | BKW | BKS | GBK | NBK | Q+T |
| +C | +LC | +SR | +A | +N | |
| Cold rolled | Chilly drawn | Stress relieved | Annealed | Normalized | Quenched+Tempered |
6. Bore treatment: Honing, skiving&roller burnishing
seven. Bore roughness handle: Ra0.25um max or Ra0, 35um max for honed tubes, Ra0.25um max for skived&roller burnished tubes.
8. Machining&turning: as per drawing
9. Challenging chrome plating: as for each request.
ten. CZPT export packing: In bundles tied with steel strips. Int&ext oil coating. End plastic caps. Exterior packing by PVC bags and knit baggage.
11. CZPTized packing and marking can be offered on ask for.
Cold DRAWN SEAMLESS TUBES – NOT Heat Dealt with:
Cold DRAWN SEAMLESS Metal TUBE – Warmth Dealt with:
Part II: Frequently Requested Inquiries
1. MOQ: CZPTly Min Order Amount can be 2-three tons/dimension for tubes with OD under 250mm, and 10 tons/dimension for tubes with OD above 250mm. Occasionally, it relies upon on steel quality you need to have. If you want special quality like E410, E470 or alloy steel tube, MOQ must be 10 tons/dimensions at the very least.
two. Shipping and delivery Time: CZPTly, our shipping time for honed tubes is about forty-60 days depending on the sizes and portions. It will consider us fifteen-30 days to get raw materials. For example, if you require 3 tons of small dimension honed tubes 50mm*40mm with roughness of Ra0.25um max, it will just take us at minimum thirty times to hone this size.
3. Warranty&Ensure: Guarantee&guarantee period is 6 months since we produce the tubes, and we are not liable for high quality problem triggered by wrong unloading or storage soon after shipment. We welcome customer’s inspection before shipment.
4. Payment Method: We acknowledge payment approach like T/T, L/C, or D/P, but it depends on our investigation about buyers. We have a solution to appraise the credit history of customers from all above the globe, and time and amount of D/P we can release is established by the analysis.
5. Top quality Handle: ninety% of the tubes are produced from hot rolled seamless pipes. So, good quality of raw material decided top quality of completed tubes. We obtain uncooked substance from secure suppliers who are major metal mills, and we inspect the uncooked substance as for every the technical specs. For the duration of our generation process, there is inspection and good quality handle in each and every stage.
Component III: Business INTRODUCTION
We are a manufacturer of cold drawn, chilly rolled, and hydraulic cold drawn metal tubes with OD upto 356mm because 2002. Masking an spot of about 32000M2, we have twelve regular workshops with 2 hydraulic cold drawing benches, 4 chain chilly drawing benches, and 2 ERW mills. Our facilities handles all the creation processes from pickling, cold drawing, heat managing, observed slicing, straightening, inspection, packing to further machining &turning, cold drawing die fabrication, and products repairation&upkeep.
Manufacturing unit Physical appearance:
Uncooked Content Stock:
HYDRAULIC Cold DRAWING:
MULTI-ROLLER STRAIGHTENING:
STRAIGHTENING BY Press:
Observed Slicing:
LATHES:
HONING:
DEEP Hole Boring/DRILLING:
SKIVING&ROLLER BURNISHING:
